VIBRO - FIN SMA SERIES MACHINES
Working Principle of Vibro - Fin: Vibro Finishing process involves rubbing of parts to be finished with suitable media (ceramic, plastic, steel, etc) in presence of finishing compound for pre-determined time. VIBRO - FIN vibratory finishing machine has a bowl that holds parts, media, water & finishing compound. The special vibratory motor mounted at C.G. of the system generates intense spiral motion of parts & media in the bowl. The relative motion between parts & media results in deburring, descaling, polishing etc. VIBRO - FIN vibratory finishing machine has different options for separation of parts from media. The bowl has hot cast Polyurethane Lining or natural Rubber Lining, drain for discharge of used compound & water. VIBRO - FIN vibratory finishing machine is available is wide range of capacity from 25 lits to 2500 lits. VIBRO - FIN SMA Series Machines: In these machines there is in-built part-media separation arrangement. At the end of the process cycle flapper is lowered into the bowl manually & part media mixture is carried over to the separation screen. The media will fall back in the bowl & parts come out of machine. 80 % to 100 % separation can be achieved depending on various parameters. This type should be opted when part / media separation is feasible by screening method.
